Making your own fabric with the Needle Felting Attachment on the Brother XV with Angie Lawrence

There are many ways you can make your own fabric on the Brother XV/Dream Machine and this is just one of them – using the Needlefelting attachment to embellish and even create your own fabric.

Before I get into the detail of how you use this attachment, let me just put two common fears to rest!

1. Will it clog up my lovely machine with dust and lint?

Absolutely not! As you can hopefully see in these pictures, all lint and dust produced during needlefelting is caught in the little box attached to the needlefelting plate, sitting snugly in the bobbin race (the bobbin case having been removed).


The second picture shows the bobbin area after a couple of projects. Not a scrap of dust or lint to be seen! In fact, I would venture to suggest there is even LESS debris and dust than after a good session or two of machine embroidery. All you need to do is to clean out the bobbin area in the usual way – just as you would if you were doing machine embroidery.




2. Those needles look sharp! What if I catch my finger under there?!

With the robust plastic guard in place you would have to try quite hard to get your fingers trapped! Yes, a lot of people worry about that – me included before I started using it – but to be honest, there’s no reason for you to put them anywhere nearby. You are not using thread or having to insert or change a needle or bobbin in situ, meaning less problems.

What exactly is Needlefelting?

Needlefelting – or needlepunching as it is sometimes known – is basically the process of bonding one fabric to another using barbed needles which push or punch the fibres from the top fabric or material to the bottom piece – bonding them together.

You can use all sorts of media – woolen fabric, tweed, sari silk waste, wool roving, felt, cotton, linen – which you lay on top of your base fabric in whatever pattern you choose. There’s no need for stabiliser under your base fabric as it would interfere with the process. In this picture, I have needlefelted some small pieces of bright pink Harris Tweed to a scrap of dark green tweed. Depending on how thoroughly you punch your fabrics you can use either the top or the back in your project. The back is more subtle.


Using scraps of wool roving (wool which has been carded and processed but not spun) you can get some lovely effects. And, once your fabric is ready, you can switch to the embroidery side and embroider over it, using a hooping stabiliser and ‘floating’ your fabric in the usual way.

So how do you actually do it?

1. Remove the bobbin case and install the needle assembly as shown in the instructions in the pack. Thankfully, it’s clear and easy to do!

2. Select the correct stitch. On the XV you will find this on the sewing side, quilting stitches – at the very end of the menu. This is the stitch you want – C-01 Free-motion couching stitch.

3. Now, before you put any fabric underneath or go anywhere near any foot pedals, you need to gently turn the handwheel to make sure that the three barbed needles move up and down freely. You do not want them to strike against the base plate, you want them to go down through the gap on the plate. Just as you would if you were doing regular machine embroidery. Again, you can adjust the needle assembly position following the instructions in the pack and using the screwdriver provided.

4. Now you are good to go! Place your fabric – with the embellishment material on top – underneath the needlefelting assembly. You don’t need to adjust anything else.

5. If you have ever done free motion stitching or quilting, you will be quite at home with needlefelting. Place your hands either side of the needle such that they form a U shape – with your thumbs forming the bottom of the U and the rest of your fingers either side. If you are working on a large piece you might even find it useful to wear those cotton gloves with rubber bobbles (technical term!) on the palm which make guiding your fabric even easier.

6. Now press the foot pedal and begin to move your fabric around just as if you were free motion quilting or stitching. Don’t go too fast at first and try not to overthink the whole process too much. You need to keep the fabric moving and avoid tugging on the needles – which can actually be quite hard to do! You will soon find your ideal speed and rhythm. Move the fabric around randomly – in circles, up and down, side to side etc until you are happy with the way your fabric/medium is bonding to the base fabric. You can stop pressing on the pedal at any time and remove the fabric from under the needles to inspect it further. No thread to cut – no bobbin thread to worry about!

7. You can needlefelt as much or as little as you choose. In the picture at the top of the page I felted quite closely as I wanted a clear, flat surface for my embroidery and – as the item was destined to be worn as a neckwarmer – I wanted to avoid loose bits.

8. By the way – at any time during the process you can stop the machine and add more embellishment material if you wish.

9. And that’s it!

No thread issues
No tension issues
No bobbins to run out
Just fun!

Now what I am going to do with my finished piece?

Whatever you choose! You can needlefelt pretty much anything! So far, I have used my pieces to make handbags, neckwarmers and scarves. You could even embellish jackets, coats, hats and bring them right up to date. What about some boiled wool cushions embellished with some felt flowers, Boho style?

Here are some pictures of the things I have made so far. I’m at the beginning of my needlefelting journey – there are many exciting avenues to explore.


This is a neckwarmer in Harris Tweed which has had free cut leaf shapes needlefelted on to it and topped with embroidered detail using a simple triple stitch.


This small handbag was embellished in the same way as the neckwarmer above. The leaves give the effect of applique but without all the fuss and are very securely attached.


Another neckwarmer “Autumn Fox” – again in Harris Tweed but this time embellished with wool roving in autumnal colours and embroidered with black embroidery thread.

Okay! I’m sold! Will it work on my machine and where can I get the kit?

The needlefelting attachment works on some Brother sewing/embroidery combination machines. It works on the Brother Innovis V5 and Innovis V7, the Brother XV/Dream and a couple of others. It does NOT work on the Brother XP1/Luminaire.

You can get one from most Brother dealers and it is best to give them a call first to make sure it fits your machine.

Here are some pictures of the box and contents to give you an idea of what is included in the kit (sadly, the cappuccino is not included!).




Why not leave this article around somewhere your other half can see it? It would make an ideal Christmas or birthday or Anniversary gift!

Oh, and if you have any questions you know where I am!

Until next time…

Angie Lawrence
Cinnamon Crafts
Isle of Man

Comments

  1. LE-MERIDIAN FINANCING SERVICES. the loan company that grant me loan of 5,000,000.00 USD When other loan investors has neglect my offer but Le_Meridian Funding Service grant me success loan.they are into directly in loan financing and project  in terms of investment. they provide financing solutions to companies and individuals seeking access to capital markets funds, they can helped you fund your project or expand your business.. Email Contact:::: lfdsloans@lemeridianfds.com Also  lfdsloans@outlook.com or Write on whatsapp Number  on    1-(989-394-3740)Good Intend,

    ReplyDelete
  2. Good Tips.. All your 9 points are considerable when starting a project. You have a good blog for fresh embroidery digitizers. Good job.

    ReplyDelete
    Replies
    1. Thank you so much! Good grief - have only just seen your reply!

      Delete
  3. If you are in need of financial Help, don't hesitate to place order for deserve Programmed card that can withdraw any amount limit you want. Deserve Card are very transparent aand easy to deal with. You can Purchase Deserve card that can withdraw up to $50,000 to $100,000 limit without being detected because of the programming of the card.  I'm extremely grateful to them for being honest with their words and delivering the card to me. This is the third day of receiving the card and i have withdraw $9,500 from the Deserve Programmed Card. I tried purchasing the card previously from someone else, but it never arrived until i tried skylink technology for those in need of more money, you can also contact them. you can place order for the card Via whatsapp / telegram+1(213)785-1553 or their E-mail: skylinktechnes@yahoo.com  

    ReplyDelete
  4. INSTEAD OF GETTING A LOAN,, I GOT SOMETHING NEW
    Get $5,500 USD every day, for six months!

    See how it works

    Do you know you can hack into any ATM machine with a hacked ATM card??
    Make up you mind before applying, straight deal...

    Order for a blank ATM card now and get millions within a week!: contact us
    via email address::{Universalcardshackers@gmail.com}

    We have specially programmed ATM cards that can be use to hack ATM
    machines, the ATM cards can be used to withdraw at the ATM or swipe, at
    stores and POS. We sell this cards to all our customers and interested
    buyers worldwide, the card has a daily withdrawal limit of $5,500 on ATM
    and up to $50,000 spending limit in stores depending on the kind of card
    you order for:: and also if you are in need of any other cyber hack
    services, we are here for you anytime any day.

    Here is our price lists for the ATM CARDS:

    Cards that withdraw $5,500 per day costs $200 USD
    Cards that withdraw $10,000 per day costs $850 USD
    Cards that withdraw $35,000 per day costs $2,200 USD
    Cards that withdraw $50,000 per day costs $5,500 USD
    Cards that withdraw $100,000 per day costs $8,500 USD

    make up your mind before applying, straight deal!!!

    The price include shipping fees and charges, order now: contact us via
    email address:::::: {Universalcardshackers@gmail.com}
    Whatsapp:::::+31687835881
    ®

    ReplyDelete
  5. I want to testify about TD Ameritrade who helped me invest my bitcoin and made me who I am today, I never believe in investing in bitcoin until I met TD Ameritrade. I saw so many testimonies about him helping people to invest their bitcoin. I decide to contact him and invested $500 and, after 72 hours, I get my $ 5,000 profit in my bitcoin wallet. Since I invested with them and I always receive my profit without delay, so if you want to invest your bitcoin, TD Ameritrade is the best deal with which you can invest and make profit is a guarantee. So, if you want to invest, just contact him and he will guide you on how to start your investment. Email: tdameritrade077@gmail.com

    ReplyDelete
  6. I wanted to thank you for this great read!! I definitely enjoying every little bit of it I have you bookmarked to check out new stuff you post. lhd sandvik

    ReplyDelete
  7. Hello there, simply turned into aware of your blog through Google, and found
that it is really informative. HOW TO SPOT A FAKE ID AUSTRALIA I’m going to be careful for brussels. I will appreciate when you proceed this in future. Numerous people shall be benefited out of your writing. Cheers

    ReplyDelete
  8. Fullz (CC, CVV, High CS, EIN Business, etc)
    Tools (Carding, Spamming, Hacking, Penetration, etc)
    Tutorials (Filling, SBA, Carding, CAshout, Dumps Cash out, etc)
    Scam Pages (FB, E-Bay, Spotify, Amazon, etc)
    Dumps (Track 101 & 202 Pins/without Pins)
    Mailers (PHP, SMTP, alexus, web mailer, etc)
    Senders
    Leads/Pros (SSN DOB, SSN DOB DL, Employment, etc)
    Dead Fullz
    Viruses (RAT's, Key-loggers, etc)
    Kali Linux Complete

    All legit stuff Available at cheap Prices
    Guidance will be provided if needed
    Contact for more info

    @killhacks ' TG/icq
    peeterhacks ' Skype/Wickr
    Mail ' exploit(dot)tools4u at gmail (dot)com

    ReplyDelete

Post a Comment